The “water spot remover gel” out of the “MANSORY Car Cosmetic programme” removes mineral deposits, ceramic coatings and waxes as well as wiper or nano coatings from glass and painted surfaces. Due to the high concentration of active ingredients, this product is intended for professional cleaning for maximum demands. The unique gel consistency prevents the product from dripping and thus ensures a very long contact with the surface to be cleaned.

Usage: Before using MANSORY Car Cosmetic - WATER SPOT REMOVER GEL, the surface must be thoroughly cleaned and then the product applied to the surface to be cleaned with a sponge. Depending on the degree of soiling of the surface, MCC-WSRG must be worked in for several seconds in circular movements, then rinsed thoroughly under running water and the surface wiped dry.

Please note: Special qualifications are required to use the product and an appropriate training on the product should also be provided. Before first use, test on a small area of the windscreen, preferably from the passenger side. In the area of the windscreen wipers, do not leave the product on the glass surface for more than 1 minute. Do not leave the product on painted surfaces for more than 2 minutes. Before use, make sure that the surface to be cleaned is not exposed to direct sunlight or excessive wind. The product should be stored in a cool, dry place at 5-25 °C at all times. Do not allow the product to freeze and do not expose it to strong UV radiation or allow it to overheat. Do not allow to dry on the surface. Use in any other way or for longer than recommended by the manufacturer may result in permanent surface damage. The product must be kept out of the reach of children at all times.